Product
KEM PROOF 71: Elastomeric waterproofing coating.

Description and Application parameters
Heavy duty bituminous elastomeric waterproofing coating for asbestos sheets, sunken portion of toilets and underground structures.

Dosage / Coverage
15 - 20 sq.ft./kg for 2 coats. (Coverage varies with actual site conditions). 200 - 300 microns (DFT)

Application Area

• Asbestos cement roofs and around J hooks
• Sunken portion of toilets
• Sewage pipes
• Plinth, foundation, basement and other underground structures

Product
KEM PROOF 71: Elastomeric waterproofing coating.

Description and Application parameters
Heavy duty bituminous elastomeric waterproofing coating for asbestos sheets, sunken portion of toilets and underground structures.

Dosage / Coverage
15 - 20 sq.ft./kg for 2 coats. (Coverage varies with actual site conditions). 200 - 300 microns (DFT)

Application Area

• Asbestos cement roofs and around J hooks
• Sunken portion of toilets
• Sewage pipes
• Plinth, foundation, basement and other underground structures

Product
KEM PROOF 72: Elastomeric waterproofing coating.

Description and Application parameters
Heavy duty aliphatic acrylic elastomeric waterproofing for external surfaces. It is water based, can be tinted to any shades, resistance to dirt picks, anti-fungal and anti - algae and can be applied both by brush and roller.

Dosage / Coverage
As coat: 30 - 35 sq.ft./kg for 2 coats, (Coverage varies with actual site condition) 100 - 110 microns (DFT) As primer: 130 - 150 sq.ft./kg.

Application Area

• External walls
• Roofs and parapet walls
• Designed for exterior RCC, cement sand plastered surfaces

Product
KEM BRUSH 73: Cementitious acrylic modified waterproof coating.

Description and Application parameters
KEM BRUSH 73 is a high performance two component elastomeric cementitious waterproof coating for concrete, slabs, masonry and as surface protection for reinforced concrete.

Dosage / Coverage
6 sq.ft./kg for 2 coats for total minimum thickness of 1 mm (DFT). For protection against physical damage use 15 - 25 mm thick cementitious screed. Nature : Two components Appearance : Grey powder and white liquid Mixing Ratio: Powder : liquid = 2:1 (by wt.) Consistency after mixing: Brushable.

Application Area

• Speciality treatment coat for internal and external waterproofing
• Bathrooms, basements, toilet and wet areas
• Dam walls, swimming pools, basins, water storage tanks, balconies, terraces
• Application in marine areas
• Protective coat against carbonation and chloride attack

Product
KEM PLAST 74: Liquid mortar plasticizer.

Description and Application parameters
KEM PLAST 74 is used to improve the workability of cement mortar and prevent shrinkage cracks. KEM PLAST 74 also improves adhesion and durability of plaster.

Dosage / Coverage
Dosed between 0.3% and 0.4% by weight of cement.

Application Area

• Plaster mixes
• Plain cement concrete

Product
KEM PROOF 75: White coloured polymer for modified cement based water proof coating and mortar.

Description and Application parameters
KEM PROOF 75 is an acrylic copolymer and is used specifically to modify the cementitious systems in a multiple way:

• Tough water proof barrier coating
• Improves flexural and tensile strength
• Reduces chloride/salt penetration

Dosage / Coverage
KEM PROOF 75: OPC 1:1.5 by weight. Coverage: 40 sq.ft./2 coats. (Depending upon the site conditions.)

Application Area

• Underground and water retaining structures
• Hairline crack repairs
• Porous surface sealing

Product
KEM PROOF 77: Liquid integral water proofing compound for concrete confirming to IS: 2645.

Description and Application parameters
KEM PROOF 77 is a speciality additive based compound:

• Produce impermeable matrix Reduce
• Porosity and bleeding Improve
• Consistency at lower dosage

Dosage / Coverage
200 g to 50 kg bag of cement.

Application Area

• Basement concrete
• Underground structures
• Terrace concrete

Product
KEM REPEL 78: Water repellant.

Description and Application parameters
KEM REPEL 78 is a ready to use all purpose colourless water repellent:

• Easy penetration to masonry substrates
• Acts as a damp proof course when injected

Dosage / Coverage
Coverage: 70 - 100 sq.ft./coat/l depending upon the substrate conditions.

Application Area

• Exterior surfaces/stone masonry structures
• Mineral paints
• Ceramic and decorative tiles

Product
KEM REPEL 79: Water repellent impregnation coating.

Description and Application parameters
KEM REPEL 79 is all purpose unique colour- less water repellant emulsion based on silone siloxane:

• Easy penetration to masonry substrates
• Resistant against high alkalinity

Dosage / Coverage
Coverage: 3 - 5 sq.m./coat/l depending upon the substrate conditions.

Application Area

• Mineral plasters/stone structures
• Brick structures
• Ceramic and structural tiles
• Concrete blocks

Product
KEM PROOF 80: Powder integral waterproof for cement concrete and mortar.

Description and Application parameters
KEM PROOF 80 is an integral waterproofing compound for concrete and mortar, forms an internal barrier against water penetration, also increases the workability of mortar, reduces water absorption and thereby protects against freeze - thaw effect.

Dosage / Coverage
Add 1 kg of KEM PROOF 80 to 50 kg of dry cement/sand mix to produce concrete or mortar. (Do not add KEM PROOF 80 to the mixing water).

Application Area

• Terraces
• Bathrooms
• Basements
• Swimming pools
• Water tanks

Product
KEM PROOF 81: Crystalline waterproofing compound.

Description and Application parameters
KEM PROOF 81 is an integral capillary waterproofing compound which waterproofs and protects concrete in depth.

Dosage / Coverage
Add 2 part water to 5 parts of KEM PROOF 81. 1 kg/m /coat when used alone or for dry shake broadcast. (Treated area should be kept damp for 5 days).

Application Area

• Basement and foundation
• Tunnels and subways
• Sewage and water treatment plants
• Concrete pipes
• Dams and reservoirs
• Harbours and bridges
• Parking areas

Product
KEM PLUG 82: Leak plugging compound.

Description and Application parameters
KEM PLUG 82 is cement based instant leak plugging compound.

Dosage / Coverage
To be mixed with water at a ratio 3:1 by wt. 3 parts KEM PLUG : 1 part water.

Application Area

• Tunnel lining sewage systems
• Foundations

Product
KEM DAMPSEAL 83: Two-component epoxy resin based water thinnable coating, made especially for internal walls, ceilings and RCC water tanks.

Description and Application parameters
Speciality treatment coat for internal damp wall and ceiling which can be applied both in brushable and paste consistency. This product is anti-fungal, non-toxic, non-hazardous, and resistance to mild acids and alkalis.

Dosage / Coverage
Mixing ratio for Putty = 1: 1: 2 by weight (Base: Hardener: White cement)
Coverage as finish coat: 35 - 40 sq.ft./kg 2 coats
Coverage as putty 6 - 8 sq.ft./kg./coat (Coverage varies with the actual site condition)

Application Area

• Waterproofing RCC water tanks.
• For internal damp walls and ceilings.
• Primer for painting on internal and external walls
• Damp wall coating for toilets, kitchen walls and lift pits
• Applied in sterile areas of food and pharma industries

Product
KEM BOND 50: Acrylic co-polymer based bonding agent for concrete.

Description and Application parameters
KEM BOND 50 has an excellent bonding property for adhesion to cementitious, wood, glass, steel and most other substrates.

Dosage / Coverage
Mixed with OPC at a ratio 1:1 by weight. Covers 40 - 45 sq.ft. depending upon the porosity of surface.

Application Area
As a bond coat for:

• New to old concrete
• Old to old concrete

Product
KEM CRACKFILL 51: Acrylic crack filler.

Description and Application parameters
KEM CRACKFILL 51 is an acrylic co- polymer based white thixotropic paste specially formulated for sealing static cracks.

• Excellent adhesion to building substrates
• Better flexibility to withstand temperature variations
• UV and water resistant

Dosage / Coverage
Density: 1.40 ± 0.05 g per cc. Coverage: Approx. 25 RM/kg for 5 mm wide cracks.

Application Area

• Exterior and interior surfaces
• Plastered surfaces

Product
KEM SEAL 52: Polymer modified surface crack repair.

Description and Application parameters

• Crack bridging, non-shrink, non-sag, for concrete and plaster surfaces. Hydrophobic property ensures enhanced waterproofing
• Excellent bond to the substrate
• Highly flexible to accommodate physical and thermal movements
• No independent primer required, ready to use and cost effective

Dosage / Coverage
30 RMT/kg for 6mm x 6mm.
Mortar consistency: 4 parts product with 1 part water.
As a coating: 3 parts product with 1 part water.

Application Area

• External cracks in buildings
• Building facades

Product
KEM SEAL 53: Crack sealer.

Description and Application parameters
KEM SEAL 53 is a single component cementitious base crack sealing compound.

Dosage / Coverage
4 parts KEM SEAL 53 is to be mixed with 1 part of water and applied.

Application Area

• Internal and external cracks in plaster

Product
KEM MORTAR 55: Polymer-modified fibre reinforced structural repair mortar.

Description and Application parameters
KEM MORTAR 55 is a single component cement based enriched with fine additives, fibre reinforced restoration mortar. Used for structural repair new and old concrete. Applied manually or mechanically.

Dosage / Coverage
Add 3.75 to 4.25 l of water in 25 kg KEM MORTAR 55 for pumping or spraying and 4.5 l of water to maintain consistency.
Coverage of KEM Mortar 55 is approx. 1.85 kg/m²/mm thickness with yield of 13. 75 l.

Application Area

• Concrete repair affected by repeated loads
• Structures affected by marine environment
• Bridges, harbours, dams
• Repair of pre-fabricated concrete elements
• Repair of concrete structures with carbonation process
• Repair of damaged areas in industries due to aggressive environment

Product
KEM MICROCONCRETE 56: Flowable mortar for RCC structure.

Description and Application parameters
KEM MICROCONCRETE 56 is a general purpose non-shrink, cementitious, flowable high strength mortar for repairs with high strength precision concrete. Free flowing on site, suited for thickness up to 40mm - 100mm. Suitable for various structural strengthening measures such encasement build-ups, jacketing etc.

Dosage / Coverage
0.16 w/p ratio @ 300C. Approx. 13.0 l/25 kg bag. Actual yield depends upon the consistency required as per the site requirement.

Application Area

• General repair and renovation of decayed beams, columns, walls, and honey required and compaction is not available.
• Jacketing of RCC columns.
• Strengthening of vertical members

Product
KEM FLOOR 57: Non-metalic surface hardener.

Description and Application parameters
KEM FLOOR 57 is ready to use non-metallic floor hardener designed with high quality natural aggregates which gives abrasion and wear resistance. KEM FLOOR 57 bonds monolithically to the base concrete, suitable for existing and as well as new floors.

Dosage / Coverage
Light traffic 3 - 5 kg/sq.m.
Medium traffic 4 - 5 kg/sq.m.
Heavy traffic 6 - 7 kg/sq.m.

Application Area

• Hardwearing and dustproof flooring.
• Anti-skid and anti-slip flooring
• Shop floors, warehouse
• Loading bays, rafts
• Car parking, garages
• Automobile industry

Product
KEM GROUT 58: Expanding grout admixture.

Description and Application parameters
KEM GROUT 58 is a chloride-free expanding grout admixture for injection grouting in structural and pre-stressed concrete elements.

• Improves cohesion in the concrete mix
• Avoids segregation of the grouting mortar.

Dosage / Coverage
Dosed in between 1.0 to 2.5% by weight of cement.

Application Area

• Pocket grouting
• Porous surface grouting

Product
KEM RUSCON 59: Rust converter.

Description and Application parameters
KEM RUSCON 59 is a high performance solution for converting highly reactive rusted surface to a passive surface

Dosage / Coverage
Coverage: 18 to 20 sq.m./l depending on the volume of rust on the metal surface.

Application Area
Rusted iron and steel surfaces at:

• Chemical plants
• Corrosive areas

Product
KEM BOND 76: Polymer as mortar modifier for repair and rehabilitations.

Description and Application parameters
KEM BOND 76 is styrene butadiene rubber based dispersion for improving adhesion and strength of all types of commonly used mortars for restoration jobs.

Dosage / Coverage
Mixed with cement and sand at a ratio 1:5:15 by weight.

Application Area

• Structural repairs

Product
KEM TILE 21: Tile fixing adhesive.

Description and Application parameters
KEM TILE 21 is a speciality additive based cementitious product for fixing tiles to surfaces for its non-sagging and non-shrink advantages over conventional neat cement pastes.

Dosage / Coverage
4 kg of KEM TILE 21 covers about 1 sq.m. when applied in 3 mm thickness. W/P ratio is 0.16 to 0.18.

Application Area

• Tiles using KEM TILE 21 can be applied on any surface whether horizontal or vertical
• Best for bathroom, toilet, kitchen, floor

Product
KEM TILE 22: Grey flexible natural stone tile adhesive.

Description and Application parameters
KEM TILE 22 is a polymer modified, flexible cementitious based high performance waterproof adhesive for fixing natural stones, heavy duty tiles, ceramics, mosaic, granite for floor and wall and walls.

Dosage / Coverage
The water powder ratio for KEM TILE 22 is 0.24 - 0.28 i.e. 25 kg bag requires 6 - 7 l water depending on the temperature 6-7 m²/25 kg bag at 3 mm thickness and 3 - 3.5 m² at 6 mm thickness.

Application Area

• Indoor and outdoor use
• Walls and floors
• Swimming pools
• Vitrified tiles
• Natural stones and clinker bricks
• On gypsum fibre boards, aerated concrete, plaster boards

Product
KEM TILE 23: White adhesive for glass and marble.

Description and Application parameters
KEM TILE 23 is a high performance white cement based polymer modified tile fixing adhesive for internal walls and floor. Suitable for external floorings, tile-on-tile applications, marbles, glass tile and natural stone.

Dosage / Coverage
The water powder ratio is 0.24 - 0.28 i.e. 25 kg bag requires 6 - 7 l water depending on temp. Glass tile (60 - 70 sq.ft./25 kg bag at 3 mm thickness. 30 - 35 sq.ft./25 kg bag at 6mm thickness)
Glass mosaics (100 - 110 mm sq.ft./25 kg bag at 2mm thickness)
Marble (30 - 35 sq.ft./25 kg at 6mm thickness)

Application Area

• Internal flooring
• Tile on tile applications
• Marbles
• Glass tiles and natural stores

Product
KEM TILE 24: Tile joint filler

Description and Application parameters
KEM TILE 24 is cement based tile joint filler available in different colours. Its versatile property also helps to stop seepages through tile joints.

Dosage / Coverage
One part of KEM TILE 24 is to be added to 3 parts of KEM TILE 24.

Application Area

• Swimming pools
• Bathrooms
• Claddings

Product
KEM TILE 25: Ceramic tile cleaner

Description and Application parameters
KEM TILE 25 is a concentrated mildly acidic ceramic tile cleaner/stain remover. It removes mineral deposits, cement residues, soap film, efflorescence, algae and most types of soil. Excellent cleaner for floor and walls.

Dosage / Coverage
Spray cleaning : Dilute KEM TILE 25 1:2 with water. Spray onto the surface and let it set for one minute. Wipe off with a clean soft cloth.
Wet mopping/Sponge mop: Dilute KEM
TILE 25 1:2 with water. Apply solution with a clean mop or sponge. Let solution dry on the surface. Rinsing is not necessary.
Approximately 10m² - 50m²/l (depending on dilution).

Application Area

• Ceramic tile
• Porcelain tile
• Sanded grout

Product
KEM JOINT 31: Two component gun grade joint treatment

Description and Application parameters
KEM JOINT 31 is two component system consisting of a Base compound and Accelerator (curing agent).
Complies to BS4254-1983.

Dosage / Coverage
Mixing ratio: Base : Accelerator = 92: 8 parts by weight.

Application Area

• Sealing of moving construction joints as well as joints running through the ceilings.
• Between different construction materials in high rise buildings, concrete highways, PQC, bridges, water retaining structures, subways, basements, culverts, airfields, internal and external wall claddings, vertical joints in retaining walls, vehicular & pedestrian traffic pavements of concrete etc.

Product
KEM JOINT 32: Two component pour grade joint treatment

Description and Application parameters
KEM JOINT 32 is two component system consisting of a Base compound and Accelerator (curing agent).
Complies to BS 5212 - 1990

Dosage / Coverage
Mixing ratio: Base : Accelerator = 92: 8 parts by weight.

Application Area
Applied between different construction joints in concrete highways, bridges, water retaining structures, water treatment plants, basements, subways, culverts, airfields, vehicular and pedestrain traffic pavements of concrete, areas which are affected by fuel, oil etc.

Product
KEM PRIMER 33: Primer for joint treatment

Description and Application parameters
KEM PRIMER 33 is a low viscosity primer specially developed product to enhance the bonding for joint treatment.

Dosage / Coverage
Coverage : 50 - 60 sq.ft./l/coat.

Application Area

• Concrete surfaces
• Porous stones
• Wood
• Asbestos
• Bricks

Product
KEM GROUT NS 1: Non-shrink free flow cementitious grout

Description and Application parameters
KEM GROUT NS 1 is a premixed powder, containing well graded aggregates, cement and speciality chemical additives to enable achievement of high early strength. When mixed with the right quantity of water on site, the product turns into a free flowing grout.

Dosage / Coverage
25 kg bag mixed with 4 l of water (flowable) yields 13.2 l. Water powder ratio of 0.16 should be maintained.

Application Area

• Machinery foundation and base plates
• Compression and turbines
• Heavy duty grouting of pumps and mortars
• Chemical and engineering plants
• Structural columns and bearing plates
• Anchor and seating bolts and pockets

Product
KEM GROUT NS 2: Non-shrink, free flow, high strength cement grout

Description and Application parameters
KEM GROUT NS 2 is a premixed powder, containing well graded aggregates, cement and speciality chemical additives to enable achievement of high early strength. When mixed with the right quantity of water on site, the product turns into a free flowing grout.

Dosage / Coverage
25 kg bag mixed with 4 l of water (flowable) yields 13.2 l. Water powder ratio of 0.16 should be maintained.

Application Area

• Machinery foundation and base plates
• Compression and turbines
• Heavy duty grouting of pumps and mortars
• Chemical and engineering plants
• Structural columns and bearing plates
• Anchor and seating bolts and pockets

Product
KEM GROUT 43: Polyester resin anchoring grout

Description and Application parameters
KEM GROUT 43 is a two-pack polyester resin based anchoring/grouting material in form of pourable mortar.

• Rapid strength gain
• Vibration and corrosion resistant
• Placeable under water

Dosage / Coverage
Density: 1.99 0.02 g / cc.

Application Area

• Foundation bolts
• Base and stress anchor plates
• Tie back anchors
• Overhead rail tracks
• Starter bars amd dowels

Product
KEM GROUT EP: Epoxy based high strength grout

Description and Application parameters
KEM GROUT EP is solvent free, three- component high performance non-shrink free flowing epoxy grout for supporting equipment with precision alignment.

Dosage / Coverage
Depends upon the site requirement.

Application Area

• Grouting bolts and pins in horizontal and overhead applications
• Grouting base plates of heavy vibrating machines
• Precast section
• Installing Cone crusher, mine hoists, large compressors, turbines etc.