 |
About Us | Products | Clientele | FAQs | Careers | Enquiry | Contact Us | Home | |
|
|
 |
|
| Home :: Products :: Project Overview |
|
|||||||||||||||
|
|||||||||||||||
 | |||||||||||||||
|
|||||||||||||||
|
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
Description and Application parameters
Heavy duty bituminous elastomeric waterproofing coating for asbestos sheets, sunken portion of toilets and underground structures.
Dosage / Coverage
15 - 20 sq.ft./kg for 2 coats. (Coverage varies with actual site conditions). 200 - 300 microns (DFT)
Application Area
Description and Application parameters
Heavy duty bituminous elastomeric waterproofing coating for asbestos sheets, sunken portion of toilets and underground structures.
Dosage / Coverage
15 - 20 sq.ft./kg for 2 coats. (Coverage varies with actual site conditions). 200 - 300 microns (DFT)
Application Area
Description and Application parameters
Heavy duty aliphatic acrylic elastomeric waterproofing for external surfaces. It is water based, can be tinted to any shades, resistance to dirt picks, anti-fungal and anti - algae and can be applied both by brush and roller.
Dosage / Coverage
As coat: 30 - 35 sq.ft./kg for 2 coats, (Coverage varies with actual site condition) 100 - 110 microns (DFT) As primer: 130 - 150 sq.ft./kg.
Application Area
Description and Application parameters
KEM BRUSH 73 is a high performance two component elastomeric cementitious waterproof coating for concrete, slabs, masonry and as surface protection for reinforced concrete.
Dosage / Coverage
6 sq.ft./kg for 2 coats for total minimum thickness of 1 mm (DFT). For protection against physical damage use 15 - 25 mm thick cementitious screed. Nature : Two components Appearance : Grey powder and white liquid Mixing Ratio: Powder : liquid = 2:1 (by wt.) Consistency after mixing: Brushable.
Application Area
Description and Application parameters
KEM PLAST 74 is used to improve the workability of cement mortar and prevent shrinkage cracks. KEM PLAST 74 also improves adhesion and durability of plaster.
Dosage / Coverage
Dosed between 0.3% and 0.4% by weight of cement.
Application Area
Description and Application parameters
KEM PROOF 75 is an acrylic copolymer and is used specifically to modify the cementitious systems in a multiple way:
Dosage / Coverage
KEM PROOF 75: OPC 1:1.5 by weight. Coverage: 40 sq.ft./2 coats. (Depending upon the site conditions.)
Application Area
Description and Application parameters
KEM PROOF 77 is a speciality additive based compound:
Dosage / Coverage
200 g to 50 kg bag of cement.
Application Area
Description and Application parameters
KEM REPEL 78 is a ready to use all purpose colourless water repellent:
Dosage / Coverage
Coverage: 70 - 100 sq.ft./coat/l depending upon the substrate conditions.
Application Area
Description and Application parameters
KEM REPEL 79 is all purpose unique colour- less water repellant emulsion based on silone siloxane:
Dosage / Coverage
Coverage: 3 - 5 sq.m./coat/l depending upon the substrate conditions.
Application Area
Description and Application parameters
KEM PROOF 80 is an integral waterproofing compound for concrete and mortar, forms an internal barrier against water penetration, also increases the workability of mortar, reduces water absorption and thereby protects against freeze - thaw effect.
Dosage / Coverage
Add 1 kg of KEM PROOF 80 to 50 kg of dry cement/sand mix to produce concrete or mortar. (Do not add KEM PROOF 80 to the mixing water).
Application Area
Description and Application parameters
KEM PROOF 81 is an integral capillary waterproofing compound which waterproofs and protects concrete in depth.
Dosage / Coverage
Add 2 part water to 5 parts of KEM PROOF 81. 1 kg/m /coat when used alone or for dry shake broadcast. (Treated area should be kept damp for 5 days).
Application Area
Description and Application parameters
KEM PLUG 82 is cement based instant leak plugging compound.
Dosage / Coverage
To be mixed with water at a ratio 3:1 by wt. 3 parts KEM PLUG : 1 part water.
Application Area
Description and Application parameters
Speciality treatment coat for internal damp wall and ceiling which can be applied both in brushable and paste consistency. This product is anti-fungal, non-toxic, non-hazardous, and resistance to mild acids and alkalis.
Dosage / Coverage
Mixing ratio for Putty = 1: 1: 2 by weight
(Base: Hardener: White cement)
Coverage as finish coat: 35 - 40 sq.ft./kg
2 coats
Coverage as putty 6 - 8 sq.ft./kg./coat
(Coverage varies with the actual site condition)
Application Area
Description and Application parameters
KEM BOND 50 has an excellent bonding property for adhesion to cementitious, wood, glass, steel and most other substrates.
Dosage / Coverage
Mixed with OPC at a ratio 1:1 by weight. Covers 40 - 45 sq.ft. depending upon the porosity of surface.
Application Area
As a bond coat for:
Description and Application parameters
KEM CRACKFILL 51 is an acrylic co- polymer based white thixotropic paste specially formulated for sealing static cracks.
Dosage / Coverage
Density: 1.40 ± 0.05 g per cc. Coverage: Approx. 25 RM/kg for 5 mm wide cracks.
Application Area
Description and Application parameters
Dosage / Coverage
30 RMT/kg for 6mm x 6mm.
Mortar consistency: 4 parts product with 1 part water.
As a coating: 3 parts product with 1 part water.
Application Area
Description and Application parameters
KEM SEAL 53 is a single component cementitious base crack sealing compound.
Dosage / Coverage
4 parts KEM SEAL 53 is to be mixed with 1 part of water and applied.
Application Area
Description and Application parameters
KEM MORTAR 55 is a single component cement based enriched with fine additives, fibre reinforced restoration mortar. Used for structural repair new and old concrete. Applied manually or mechanically.
Dosage / Coverage
Add 3.75 to 4.25 l of water in 25 kg KEM MORTAR 55 for pumping or spraying and 4.5 l of water to maintain consistency.
Coverage of KEM Mortar 55 is approx. 1.85 kg/m2/mm thickness with yield of 13. 75 l.
Application Area
Description and Application parameters
KEM MICROCONCRETE 56 is a general purpose non-shrink, cementitious, flowable high strength mortar for repairs with high strength precision concrete. Free flowing on site, suited for thickness up to 40mm - 100mm. Suitable for various structural strengthening measures such encasement build-ups, jacketing etc.
Dosage / Coverage
0.16 w/p ratio @ 300C. Approx. 13.0 l/25 kg bag. Actual yield depends upon the consistency required as per the site requirement.
Application Area
Description and Application parameters
KEM FLOOR 57 is ready to use non-metallic floor hardener designed with high quality natural aggregates which gives abrasion and wear resistance. KEM FLOOR 57 bonds monolithically to the base concrete, suitable for existing and as well as new floors.
Dosage / Coverage
Light traffic 3 - 5 kg/sq.m.
Medium traffic 4 - 5 kg/sq.m.
Heavy traffic 6 - 7 kg/sq.m.
Application Area
Description and Application parameters
KEM GROUT 58 is a chloride-free expanding grout admixture for injection grouting in structural and pre-stressed concrete elements.
Dosage / Coverage
Dosed in between 1.0 to 2.5% by weight of cement.
Application Area
Description and Application parameters
KEM RUSCON 59 is a high performance solution for converting highly reactive rusted surface to a passive surface
Dosage / Coverage
Coverage: 18 to 20 sq.m./l depending on the volume of rust on the metal surface.
Application Area
Rusted iron and steel surfaces at:
Description and Application parameters
KEM BOND 76 is styrene butadiene rubber based dispersion for improving adhesion and strength of all types of commonly used mortars for restoration jobs.
Dosage / Coverage
Mixed with cement and sand at a ratio 1:5:15 by weight.
Application Area
Description and Application parameters
KEM TILE 21 is a speciality additive based cementitious product for fixing tiles to surfaces for its non-sagging and non-shrink advantages over conventional neat cement pastes.
Dosage / Coverage
4 kg of KEM TILE 21 covers about 1 sq.m. when applied in 3 mm thickness. W/P ratio is 0.16 to 0.18.
Application Area
Description and Application parameters
KEM TILE 22 is a polymer modified, flexible cementitious based high performance waterproof adhesive for fixing natural stones, heavy duty tiles, ceramics, mosaic, granite for floor and wall and walls.
Dosage / Coverage
The water powder ratio for KEM TILE 22 is 0.24 - 0.28 i.e. 25 kg bag requires 6 - 7 l water depending on the temperature 6-7 m2/25 kg bag at 3 mm thickness and 3 - 3.5 m2 at 6 mm thickness.
Application Area
Description and Application parameters
KEM TILE 23 is a high performance white cement based polymer modified tile fixing adhesive for internal walls and floor. Suitable for external floorings, tile-on-tile applications, marbles, glass tile and natural stone.
Dosage / Coverage
The water powder ratio is 0.24 - 0.28 i.e. 25 kg bag requires 6 - 7 l water depending on temp. Glass tile (60 - 70 sq.ft./25 kg bag at 3 mm thickness. 30 - 35 sq.ft./25 kg bag at 6mm thickness)
Glass mosaics (100 - 110 mm sq.ft./25 kg bag at 2mm thickness)
Marble (30 - 35 sq.ft./25 kg at 6mm thickness)
Application Area
Description and Application parameters
KEM TILE 24 is cement based tile joint filler available in different colours. Its versatile property also helps to stop seepages through tile joints.
Dosage / Coverage
One part of KEM TILE 24 is to be added to
3 parts of KEM TILE 24.
Application Area
Description and Application parameters
KEM TILE 25 is a concentrated mildly acidic ceramic tile cleaner/stain remover. It removes mineral deposits, cement residues, soap film, efflorescence, algae and most types of soil. Excellent cleaner for floor and walls.
Dosage / Coverage
Spray cleaning : Dilute KEM TILE 25 1:2 with water. Spray onto the surface and let it set for one minute. Wipe off with a clean soft cloth.
Wet mopping/Sponge mop: Dilute KEM
TILE 25 1:2 with water. Apply solution with a clean mop or sponge. Let solution dry on the surface. Rinsing is not necessary.
Approximately 10m2 - 50m2/l (depending on dilution).
Application Area
Description and Application parameters
KEM JOINT 31 is two component system consisting of a Base compound and Accelerator (curing agent).
Complies to BS4254-1983.
Dosage / Coverage
Mixing ratio: Base : Accelerator = 92: 8 parts by weight.
Application Area
Description and Application parameters
KEM JOINT 32 is two component system consisting of a Base compound and Accelerator (curing agent).
Complies to BS 5212 - 1990
Dosage / Coverage
Mixing ratio: Base : Accelerator = 92: 8 parts by weight.
Application Area
Applied between different construction joints in concrete highways, bridges, water retaining structures, water treatment plants, basements, subways, culverts, airfields, vehicular and pedestrain traffic pavements of concrete, areas which are affected by fuel, oil etc.
Description and Application parameters
KEM PRIMER 33 is a low viscosity primer specially developed product to enhance the bonding for joint treatment.
Dosage / Coverage
Coverage : 50 - 60 sq.ft./l/coat.
Application Area
Description and Application parameters
KEM GROUT NS 1 is a premixed powder, containing well graded aggregates, cement and speciality chemical additives to enable achievement of high early strength. When mixed with the right quantity of water on site, the product turns into a free flowing grout.
Dosage / Coverage
25 kg bag mixed with 4 l of water (flowable) yields 13.2 l. Water powder ratio of 0.16 should be maintained.
Application Area
Description and Application parameters
KEM GROUT NS 2 is a premixed powder, containing well graded aggregates, cement and speciality chemical additives to enable achievement of high early strength. When mixed with the right quantity of water on site, the product turns into a free flowing grout.
Dosage / Coverage
25 kg bag mixed with 4 l of water (flowable) yields 13.2 l. Water powder ratio of 0.16 should be maintained.
Application Area
Description and Application parameters
KEM GROUT 43 is a two-pack polyester resin based anchoring/grouting material in form of pourable mortar.
Dosage / Coverage
Density: 1.99 0.02 g / cc.
Application Area
Description and Application parameters
KEM GROUT EP is solvent free, three- component high performance non-shrink free flowing epoxy grout for supporting equipment with precision alignment.
Dosage / Coverage
Depends upon the site requirement.
Application Area
