(ASTM C - 1107 , ASTM C -191, BS – 1881, BS – 4551)
KEM GROUT NS 1 is a pre-packed cementitious grout requiring only the addition of clean water to produce at the job site non-shrink multi-application grout. It is a special and unique blend of cements, micro-silica, graded sands, water reducing agents and special auxiliary chemical to deliver expansion in the plastic tate to compensate for shrinkage. It can be mixed in a range of consistencies in varying the amount of water used to produce a fluid to trowellable consistency grouts.
It is formulated for a wide range of applications such as grouting of machinery base plates - anchor bolts - structural grouting of precast elements - grouting of crane rails also bridge seats - beams and columns - handrails. It is suitable for use in marine environments.
12.5 litres for 25 kg bag at flowable consistency
(ASTM C - 1107 , ASTM C - 827 , ASTM C-109)
KEM GROUT NS 2 is supplied as a ready to use powder which is a blend of cements, graded sand, micro-silica and a blend of expansive agents. It requires only the addition of water to produce a high fluid – high strength non shrink grout. It is a unique product designed to give positive expansion in the plastic and early hardened states, producing a low porosity high durability material.
With dual expansion properties is recommended for use in grouting heavy duty machinery base plates - power generators pumps - base plates for electrical pylons and oil storage tanks - columns - crane rails bridge seats - compressors. It is suitable for use in marine environments.
12.5 litres for 25 kg bag at flowable consistency
(BS - 1881, ASTM C - 827 – 78, BS - 4551, BS 5075 - Part 2, ASTM C - 1107)
KEM GROUT CI 2 is supplied as a ready to use powder requiring only the addition of water to produce a free flowing grout. It is a unique product designed to give positive expansion in the plastic and hardened states, producing a low porosity high durability material. It is carefully designed very fine blend of portland cements modified with silica fume, water reducing agents and expansive agents. The product is formulated to produce controlled expansion in the plastic state with low water mixing requirement to minimize segregation delivering high early strength and long lasting durability.
It is used for general purpose grouting of narrow concrete cracks or gaps between concrete and metal structures. It is recommended to filling gaps between metal electrical lighting poles base plates and the concrete supporting foundation. It is used for cable duct grouting in post tensioned concrete members. It is used for sealing / filling narrow concrete cracks, grouting machine base plates, stanchion bases and crane rails. It is an excellent grout for all horizontal ducts or concrete in situ opened channels installation of pipe lines, cables, ducts, plastic conduits etc.
A 25 kg. bag will yield approximately 16 ltrs. of pumpable free flow consistency grout.
(Conformance and Testing are: ASTM C - 109, ASTM C - 1107, ASTM C - 827 - 78, BS - 5383 PART - 2, BS - 1881, BS - 4550, BS - 4551.)
It is supplied as a ready to use powder only requiring addition of water at site. It is a blend of cements, graded silica sand, Microsilica and expansive agents. When mixed with recommended quantity of water, it will produce a high fluid ultra high strength non shrink grout.
KEM SUPER GROUT is a unique product designed to give positive expansion in the plastic and as well as hardened states, producing a low porosity and high durability grout.
KEM SUPER GROUT with dual expansion properties is recommended for use in grouting heavy duty machinery base plates, power generators, pumps, base plates for electrical pylons and oil storage tanks, columns, crane rails, bridge seats, compressors and 2 recommended especially for situation where compressive strengths exceeding 75 N/mm are required. It is suitable for use in marine environments..
25 kg bag gives a yield of 12.3 meter at flowable consistency.